Industrial Roof Coating

The Premier Industrial Roof Coating Contractor in Philadelphia, PA

The roofing material used on industrial buildings often has to withstand smoke and steam because of the work being done inside. They need extra strength to decrease their vulnerability, and industrial roof coating could provide the extra protection required.

These specialized roofing materials have different protection and restoration requirements. These types of roofs encounter more debris and are exposed to the possibility of more damage than other commercial roofs, so they need special attention.

Why Apply a Coating?

You should apply a coating to your industrial roof because it makes it more resilient. Not only are they more susceptible to damage from debris, smoke, and steam, but industrial roofs are at higher risk for leaks.

Pipes or any other structures installed on an industrial roof pose a risk and open your building up for the increased possibility of water damage. Sealing your industrial roof with a protective coating protects you from these risks.

Types of Industrial Roof Coatings

While there are many different types of roof coatings, an industrial building needs something that protects against smoke, steam, excessive heat, and leaking. Just like you put sunblock on when you go outside, your industrial roof coating should protect your roof from the heat of the sun and the heat of the exhaust pipes.

Acrylic

A water-based acrylic coating is first water resistant, so you can ensure that the seams around your pipes will be adequately sealed to prevent leaks. Secondly, it’s flexible, so it will expand and contract as your roofing materials change temperature.

Many acrylic coatings also have fire retardant additives that ensure it can withstand high heat and prevent smoke or fire damage. Like most other roof coatings, acrylic coatings are also impact-resistant and durable.

Acrylics have been widely used in industrial settings for decades and are trusted in a variety of situations. Acrylic roof coatings have saturated the market and continue to evolve. They’re one of the best solutions for your industrial roof coating.

Asphalt

Asphalt coatings can be mixed with a variety of additives that give it additional thickness, strength, and longevity. Water-based asphalt coatings are water-resistant, protecting against leaks in critical areas of your roof.

Urethane

Urethane coatings are flexible, so they’ll expand and contract with your roof. They’re also seamless, durable, and resist water pooling. They’re more impact-resistant than other coatings, so while they’re great for high traffic areas, they’re also great for roofs that incur more stress.

Aliphatic Polyurethane

Aliphatic polyurethane coatings stay cleaner than other types of coatings, so if your roof is impacted by discoloration from smoke, aliphatic polyurethane can help combat some of that. It’s also UV stable, so it can handle the sun’s intense rays.

Silicone

Silicone is an excellent industrial roof coating because it is highly water resistant and sustainable. Silicone durable enough to withstand a great deal of pooling water, but it’s not a suitable choice if your roof has heavy traffic because it’s slippery when wet.

Industrial Roof Coating Cost

Industrial roof coating services vary in cost depending on the type of coating you choose and the size of your roof. At Industrial Roofing Contractors, our professionals can give you an accurate quote and provide all the installation services you need.

The cost of a roof coating is much less than a new roof and can add at least 10 years of life to your existing roof. It also saves you money by making your building more energy efficient. As your roof coating wears off, you can simply install a new one over the top, making the price you pay now well worth it later.

How Industrial Roof Coatings are Applied

Industrial roof coating contractors know exactly what to do to apply your roof coating professionally and accurately. Normally, we will clean the roof first and inspect for damage. After repairing holes, tears, and open seams, we are ready to begin.

Starting in one corner, we will roll, brush, or spray the coating on in small sections. It’s essential that our roofers pay particular attention to any areas susceptible to leaking like the seals around pipes and in corners.

If the weather is not favorable, we may only work during certain hours of the day when the temperature is not too hot or too cold. Adverse weather conditions will impact the coating’s ability to stick. After the coating is applied, our industrial roof coating company will provide direction on how long you need to stay off the roof and let it dry. If your roof is a high traffic area, installation should occur during a time when you don’t need to access the roof for at least 24 hours.

If you are looking for industrial roof or rubber roof coating in Philadelphia, contact the professionals at Industrial Roofing Contractors.

What Our Customers Say:


"My roof was in bad shape, but these guys got it fixed. I am happy with the work done. Highly recommend giving them a shout if you have issues you need fixed."

- Kaida Willis



"I'm so pleased with the responsiveness and customer service as well as the work provided by this company. They were so quick in getting us a quote and doing the work. They also have a great warranty on their work. I love the fact that they had a drone to take pictures and show me what was wrong with the roof. They really walked me through all my options."

- Morganna Hodge



"Nick is a great guy! He keep in touch during the process, walked us through the job and came right out gave me an estimate. He booked my job quickly. Reasonably priced and they did good job! Will use them again!"

- Rosemary Ehredt

Hire a Team of Roofing Experts You Can Trust.

Schedule Your Free Roof Inspection Today!